Will plexiglass as a backsplash burn by a stovetop?

I am thinking of installing a plexiglass backsplash in my kitchen. I plan on screwing precut large plexi pieces to the wall. Is this safe to do as a backsplash behind a gas stovetop?

10 Answers

  1. Over ten years ago a friend wallpapered at the back splash. To protect the wallpaper I secured a 30″ x 24″ Plexiglas panel to the wall behind the freestanding gas range using flat head screws and finish washers at the four corners. I anticipated that the panel would be messy, difficult to clean, (which it was not) would yellow, or craze, or soften and sluff, or melt in extreme heat and would require periodic replacement. It did none of these. The wallpaper gradually discolored everywhere except behind the Plexiglas panel.

    Further investigation showed that the self ignition temperature (spontaneous combustion) of acrylic is between 850 degree F and 869 degree F and the temperature at which the material will ignite in the presence of a flame is between 550 degree F and 570 degree F. It has similar combustion properties to the cabinets on either side of it. Still, I would encourage the use of a non-combustible material at this location.

    But if you use the Plexiglas, don’t cook at over 800 degrees, or cook on an uncontrolled open flame.

  2. 1

  3. This Site Might Help You.

    RE:

    Will plexiglass as a backsplash burn by a stovetop?

    I am thinking of installing a plexiglass backsplash in my kitchen. I plan on screwing precut large plexi pieces to the wall. Is this safe to do as a backsplash behind a gas stovetop?

  4. Backsplash Behind Stove

  5. Behind a stove or gas hob you MUST use either glass, metal or ceramic materials as a backsplash. If it caught fire and burnt your kitchen out you may find the insurance didn’t cover you for making an unsafe alteration.

  6. I wouldn’t do it. The heat radiating from pots and pans could cause it to melt. Plexiglass will also scratch easily when trying to clean.

  7. Plexiglass Backsplash

  8. Plex glass is plastic. It melts and burns. Don’t use it near a flame or heat.

  9. It could burn, yes. It will discolor where heat is more intense, and it will also collect grease splatters that you cannot wash off. Been there, done that.

  10. Why not use glass?

Relevant information

If you are looking for a backsplash that is both attractive and easy to clean, you should consider using plexiglass. This type of material is easy to install behind your stovetop and is attached to the wall. Unlike stone or brick, plexiglass is durable and can be replaced easily if it becomes too dirty. Moreover, the material is inexpensive, so you can afford to buy a new one when it gets dirty.

This material is lightweight, durable and shatterproof. It can also withstand extreme weather conditions. It transmits light better than ordinary glass and filters harmful UV rays from the sun. It is also very customizable. You can choose to install it behind your stove or in other areas of your home. You can use it in the kitchen or in the bathroom. Just make sure to maintain it regularly to avoid damage.

Another advantage of using acrylic is its flexibility. You can choose from a wide variety of colors and patterns to match your kitchen’s theme. You can also get a backsplash that has a reflective surface so it can make your kitchen look bigger. If you use this type of backsplash behind your stove, make sure to keep the distance between the wall and the cooker at least 60mm. Similarly, you can use an acrylic splashback behind gas or electric hobs. However, be sure to leave enough space between the oven for the gas or electric hob to reach.

What can I use instead of a backsplash?

You can use paint, wallpaper, tile, stone, or even metal.

What material can you use as backsplash?

Just about any material can be used for backsplash as long as it is easy to clean and heat resistant. The most popular materials include glass, ceramic, stone, and metal.

How do you do acrylic backsplash?

You can use a variety of methods to install an acrylic backsplash, including using construction adhesive, screws, or a combination of both.

How do you stick acrylic sheets to the wall?

You can use a strong adhesive to stick the sheets to the wall.

Is it easy to cut acrylic splashback?

Acrylic splashback is relatively easy to cut provided you have the right tools for the job. A sharp knife or saw will do the trick, but for a neater finish, we recommend using a jigsaw or power saw. Just be sure to go slowly and use a steady hand to avoid chipping or breaking the material.

Can acrylic splashbacks be put over tiles?

It isn’t recommended to install acrylic splashbacks over tiles as the weight of the acrylic may cause the tiles to crack.

Is acrylic Splashback heat resistant?

Yes, acrylic splashbacks are heat resistant.

Can you put acrylic panels over tiles?

According to some professional bathroom remodelers, placing acrylic panels over tiles is not a good idea. While acrylic panels are waterproof, they are not impervious to water. Water can seep through the grout between tiles and form condensation on the underside of the acrylic panels.

Are acrylic splashbacks any good?

Acrylic splashbacks can be an excellent option for your kitchen. They are easy to clean and maintain, and they can help to create a sleek and modern look in your kitchen.

Can you use paint as a kitchen backsplash?

Yes, paint can be used as a kitchen backsplash.

Can you paint a backsplash with acrylic paint?

Yes

What kind of paint will stick to ceramic?

Acrylic paint will stick to ceramic.

Leave a Comment